November 10, 2020
Metal3D International Conference at Metal-Expo + live webcast


“3D Solutions For Repair And Printing of Metal Products”



EVENT PLANNERS:
CNIITMASH | STATE RESEARCH CENTER OF THE RUSSIAN FEDERATION
i3D i3D | SYSTEM 3D-INTEGRATOR
ALMAZ-ANTEY AIR AND SPACE DEFENSE CORPORATION
METAL-EXPO | INTERNATIONAL EXHIBITION
WEBCONF | MAIN EVENT PLANNER

Become the leader of your industry together with the METAL3D experts

Participate in the METAL3D web conference. Register to see it fully, to pose your questions to the METAL3D experts and to make use of the whole web-service capabilities. The number of registered users is limited.
25
Expert reports on digital production modernization
37
Cases of successful adaptation and implementation of additive solutions
>40%
Timed scheduled for analysis and answers to the questions of registered visitors
15-20%
Decrease of production costs after implementation of 3D solutions
REGISTER IN DUE TIME
Name
Email
Phone
Name
Tel.
E-mail:
Company
Business profile
Даю своё согласие на законную обработку персональных данных. Правила обработки
Спасибо! Теперь проверьте почту, пожалуйста.


Official conference media partners




SPECIALIST JOURNAL «METALLOSNABZHENIE I SBYT»
"RITM MASHINOSTROYENIYA" | MAGAZINE
ADDITIVE TECHNOLOGIES

Address of the Metal3D conference planners

«Dear Friends and Colleagues!

We are looking forward to welcoming you at the 3D Solutions for Repair and Printing of Metal Products conference. We’ve long been planning to meet all of you to share our experiences in integration of 3D solutions in production. On November 10, the best 3D production industry experts will help you immerse yourself in the world of additive solutions and pass on their practical experience of development, implementation and support thereof. The conference starts at 10:00. Do not forget to get registered in good time.”»

10.11.20, 10:00 a.m. – 05:50 p.m. | Agenda of the Metal3D conference: “3D Solutions for Repair and Printing of Metal Products”

10:00 a.m.| Conference opening ceremony


Contributor: Viktor Orlov

CNIITMASH, cniitmash.com
General Director

10:10 a.m. | Road map for development of additive technologies in the Russian Federation. Real state and prospects


Contributor: Evgeny Grigoriev

“RusAtom - Additive Technologies” LLC, rusatom-additive.ru
Director for Development and Strategy

10:30 a.m. | Industry perspectives


Contributor: Vladimir Marshov

JSC “Additive Technologies Center”, Russia, rt-3d.ru
Deputy General Director

10:50 a.m. | Development plans


Contributor: Vasily Bautin

CNIITMASH, cniitmash.com
Deputy Director of the Institute of Surface and Nanomaterials Technologies

11:10 a.m. | Break

11:20 a.m. | Overview of deposit welding technologies. Application features. Limitations


Contributor: Yakov Bondarev

“NPO “ZD-Integratsia” LLC, rusprofile.ru
Manager

11:40 a.m. | Direct laser growth of large complex shaped items


Contributor: Gleb Turichin

St.Petersburg State Maritime Technical University, smtu.ru
Rector

12:00 p.m. | Application of deposit welding for component reconditioning and repair


Contributor: Roman Mansurovich

“TSK “Avg Tekhnologii”, Russia, rusprofile.ru
General Director

12:20 p.m. | Component repair and reconditioning using the Instec deposit welding


Contributor: Maria Borisova

Instec (SIU), instek.su
General Director

12:40 p.m. | Overview of the SLM technologies. Application features. Limitations


Contributor: Georgy Kazakevich

“NPO “ZD-Integratsia” LLC, zachestnyibiznes.ru
Sales Director

01:00 p.m. | Melted material quality control and management system in the additive selective laser sintering (SLS) of metal powders


Contributor: Ivan Ivanov

JSC “NPO “CNIITMASH” cniitmash.com
Deputy General Director - Institute of Metallurgy and Machine-Building - Director

01:20 p.m. | SLM-Solutions - title of the presantation to be confirmed


Contributor: Pavel Ladnov

SLM - Solutions, slm-solutions.com
SLM-Solutions Main Technical Expert

01:40 p.m. | Experience in application of the Farsoon equipment for production of complex shaped metal parts


Contributor: Nikita Voronov

Farsoon, Китай, ***
Senior Business Development Manager in Russia and CIS

02:00 p.m. | Application of SLM technologies for 3D printing in aviation


Contributor: Maria Borisova

3D-Systems SIU, ***
General Director

02:20 p.m. | Break

02:30 p.m. | Operating experience of the most advanced additive centers in RUSSIA

02:30 p.m. | FITNIK – ADM-services for the Russian market


Contributor: Igor Ermolin

“Fitnik” LLC, fitnik.tech
Deputy Sales Director

02:50 p.m. | Operating experience of the advanced center of additive technologies on UAC orders


Contributor: Vladimir Marshov

JSC “Additive Technologies Center”, Moscow, Russia, rt-3d.ru
Deputy General Director

03:10 p.m. | Additive Technologies Competence Center of the “Almaz-Antey” Air and Space Defence Corporation


Contributor: Kirill Merenkov

JSC “Almaz-Antey” ASD Corporation", almaz-antey.ru
Head of the Additive Technologies and Materials Research Center

03:30 p.m. | Experience in application of additive technologies for solving problems of industrial enterprises, integrated research and development approach


Contributor: Mazalov Alexey

JSC “Additive Technologies Center”, Voronezh, Russia, rt-3d.ru
General Director

03:50 p.m. | From granule metallurgy to additive technologies


Contributor: Alla Logacheva

Kompozit - Roscosmos, kompozit-mv.ru
JSC “Kompozit” Division Manager

04:10 p.m. | Break

04:20 p.m. | Design and production of domestic consumable materials for metal 3D printing

04:20 p.m. | Overview of atomization technologies


Contributor: Yakov Bondarev

“NPO “ZD-Integratsia” LLC, rusprofile.ru
Manager

04:40 p.m. | Specifics of production of aluminum alloy powders for additive technologies at the JSC “NPO “CNIITMASH” gas atomization plant


Contributor: Sergey Savosin

CNIITMASH, cniitmash.com
JSC “NPO “CNIITMASH”” Laboratory Assistant Manager

05:00 p.m. | Atomizer project for the JSC “Almaz-Antey” ASD Corporation” plants


Contributor: Kirill Merenkov

JSC “Almaz-Antey” ASD Corporation", almaz-antey.ru
Head of the Additive Technologies and Materials Research Center

05:20 p.m.| Advance developments and capabilities of JSC “POLEMA” in the field of additive technologies


Contributor: Pavel Marusin

JSC “POLEMA”, polema.net
Process Manager

05:20 p.m. | Break

05:50 p.m. | Panel discussion: Prospects for 3D technologies on the aircraft, mechanical engineering, energy production markets. Creation of the 3D Industry Association


Anton Yakovlevich Dynin

NPP Group, litkons.com



Mikhail Alexeevich Turundaev

“RusAT” (ROSATOM) LLC, rusatom-additive.ru
General Director



Kirill Kolganov

CDT, kcdt.ru
Owner



Merenkov Kirill Fyodorovich

“Almaz-Antey” ASD Corporation”, almaz-antey.ru
Head of the Additive Technologies and Materials Research Center (AT&M RC)



Nefyodova Lubov Alexandrovna

“Almaz-Antey” ASD Corporation", dsszrc.ru
Applied Materials Science Research Institute (AMSRI), Director



Mikhail Rodin

i3D Company Group (NPO “ZD-Integratsia”), i3d.ru
Owner

Нажмите для звонка
+7 (495) 108 60 68
Консультации по решению